Truly smart flue gas measurement, that’s what testo 300 stands for. The compact flue gas meter is fully controlled via the large touchscreen. You see all the measured values directly without scrolling. The highly scratch-resistant display is housed in a robust plastic instrument housing, which can be relied on even under tough daily working conditions.

There are ready-made menus for the most important measurements to guide you through the work. In addition, the flue gas meter does not know what waiting times or start phases are. It is immediately ready to measure even if it is in standby mode. It handles documentation just as quickly – with the testo 300, reports can be created directly at the measurement site.

Advantages of testo 300 Basic

• Large scratch-resistant 5-inch HD touchscreen with SmartTouch function and replaceable protective film
• Ready-made intuitive menus for all relevant measurements
• 4 strong magnets with rubber coating for material-friendly mounting
• Ready to measure directly even in standby mode
• Create reports directly at the measurement site

Existing sensors

Sensors suitable for testo 320, testo 330 and testo 330-1/-2 LL can also be connected to testo 300 thanks to the practical multi-pin connector.

New donors

New sensors with twist-proof USB C connection are available for temperature measurement, e.g. of supply and return temperatures and for measuring ambient CO.

Display with SmartTouch

The touchscreen with SmartTouch technology responds instantly without delay. Intuitive operation – as easy as using your smartphone

Reports

The testo 300 allows you to document measurement results directly on site. In addition, there is a dictation function that saves you having to type in the data.

Full control of all metrics

You can see all system parameters directly on the large 5-inch HD touchscreen.

Get results faster

Clearly structured menus for all relevant measurements are ready in the measuring instrument and guide you efficiently.

Ready to use right away

No more waiting time. In standby mode, the testo 300 is immediately ready for measurement at the touch of a button.

Så här underlättar testo Smart-appen för dig:

• Enkel inställning av mätinstrumentet
• Effektiv kund- och mätplatshantering
• Pålitlig lagring av alla mätdata
• Förvandlar mobilen till en andra skärm
• Visning av grafiska mätvärdeskurvor
• Enkel dokumentering av allt arbete
• Skicka rapporter direkt från mätplatsen via e-post

testo Smart-appen finns på Google Play och App Store. Den är gratis att både ladda ned och använda.

Included in delivery

Flue gas meter testo 300 Basic with_O2 and CO measuring cell up to 4000 ppm, USB power supply.

Inlägget testo 300 Basic – O2 and CO up to 4 000 ppm dök först upp på Nordtec.

Truly smart flue gas measurement, that’s what the testo 300 stands for. The compact flue gas meter is fully controlled via the large touch screen. You can see all measurements immediately without scrolling. The highly scratch-resistant display is enclosed in a robust plastic instrument housing, which can be relied on even in tough daily working conditions.

There are ready-made menus for the most important measurements to guide you through your work. Moreover, the flue gas meter does not know what waiting times or starting phases are. It is immediately ready to measure even if it is in standby mode. It handles documentation just as quickly – with the testo 300, reports can be created directly at the measurement site.

Advantages of the testo 300 Basic

• Large scratch-resistant 5″ HD touchscreen with SmartTouch function and replaceable protective film
• Ready-made intuitive menus for all relevant measurements
• 4 strong magnets with rubber coating for material-friendly mounting
• Ready to measure directly even in standby mode
• Create reports directly at the measurement site
• Dashboard with screw mounting for extra stability
• Sensors suitable for the testo 320, testo 330 and testo 330-1/-2 LL can also be connected to the testo 300 thanks to the practical multi-pole connector.
• Clearly structured measurement menus for all relevant measurements

[show_related_featured_videos]

Included in delivery

• Flue gas meter testo 300 Basic
• Compact flue gas sensor, length 300 mm, Tmax 500 °C
• Filter for compact flue gas sensor, 10 pcs
• Bluetooth/IRDA printer for testo 300 incl.. 1 roll of printer paper
• Practical and durable service bag

Inlägget testo 300 Basic – measuring set with sensor, printer and case dök först upp på Nordtec.

Truly smart flue gas measurement, that’s what testo 300 stands for. The compact flue gas meter is fully controlled via the large touchscreen. You see all the measured values directly without scrolling. The highly scratch-resistant display is housed in a robust plastic instrument housing, which can be relied on even under tough daily working conditions.

There are ready-made menus for the most important measurements to guide you through the work. In addition, the flue gas meter does not know what waiting times or start phases are. It is immediately ready to measure even if it is in standby mode. It handles documentation just as quickly – with the testo 300, reports can be created directly at the measurement site.

Advantages of testo 300 Pro 1

• Large scratch-resistant 5-inch HD touchscreen with SmartTouch function and replaceable protective film
• H2-compensated CO measuring cell
• Optional NO measuring cell
• Ready-made intuitive menus for all relevant measurements
• 4 strong magnets with rubber coating for material-friendly mounting
• Ready to measure directly even in standby mode
• Create reports directly at the measurement site

Existing sensors

Sensors suitable for testo 320, testo 330 and testo 330-1/-2 LL can also be connected to testo 300 thanks to the practical multi-pin connector.

New donors

New sensors with twist-proof USB C connection are available for temperature measurement, e.g. of supply and return temperatures and for measuring ambient CO.

Display with SmartTouch

The touchscreen with SmartTouch technology responds instantly without delay. Intuitive operation – as easy as using your smartphone

Reports

The testo 300 allows you to document measurement results directly on site. In addition, there is a dictation function that saves you having to type in the data.

Full control of all metrics

You can see all system parameters directly on the large 5-inch HD touchscreen.

Get results faster

Clearly structured menus for all relevant measurements are ready in the measuring instrument and guide you efficiently.

Ready to use right away

No more waiting time. In standby mode, the testo 300 is immediately ready for measurement at the touch of a button.

Så här underlättar testo Smart-appen för dig:

• Enkel inställning av mätinstrumentet
• Effektiv kund- och mätplatshantering
• Pålitlig lagring av alla mätdata
• Förvandlar mobilen till en andra skärm
• Visning av grafiska mätvärdeskurvor
• Enkel dokumentering av allt arbete
• Skicka rapporter direkt från mätplatsen via e-post

testo Smart-appen finns på Google Play och App Store. Den är gratis att både ladda ned och använda.

Included in delivery

Flue gas meter testo 300 Pro I with_O2 and_{H2 compensated} CO measuring cell up to 8,000 ppm, USB power supply.

Inlägget testo 300 Pro I – O2 and CO up to 8 000 ppm dök först upp på Nordtec.

Truly smart flue gas measurement, that’s what testo 300 stands for. The compact flue gas meter is fully controlled via the large touchscreen. You see all the measured values directly without scrolling. The highly scratch-resistant display is housed in a robust plastic instrument housing, which can be relied on even under tough daily working conditions.

There are ready-made menus for the most important measurements to guide you through the work. In addition, the flue gas meter does not know what waiting times or start phases are. It is immediately ready to measure even if it is in standby mode. It handles documentation just as quickly – with the testo 300, reports can be created directly at the measurement site.

Advantages of testo 300 Pro II

• Large scratch-resistant 5-inch HD touchscreen with SmartTouch function and replaceable protective film
• Suitable for large boilers
• NO measuring cell can be retrofitted.
• Ready-made intuitive menus for all relevant measurements
• 4 strong magnets with rubber coating for material-friendly mounting
• Ready to measure directly even in standby mode
• Create reports directly at the measurement site

Existing sensors

Sensors suitable for testo 320, testo 330 and testo 330-1/-2 LL can also be connected to testo 300 thanks to the practical multi-pin connector.

New donors

New sensors with twist-proof USB C connection are available for temperature measurement, e.g. of supply and return temperatures and for measuring ambient CO.

Display with SmartTouch

The touchscreen with SmartTouch technology responds instantly without delay. Intuitive operation – as easy as using your smartphone

Reports

The testo 300 allows you to document measurement results directly on site. In addition, there is a dictation function that saves you having to type in the data.

Full control of all metrics

You can see all system parameters directly on the large 5-inch HD touchscreen.

Get results faster

Clearly structured menus for all relevant measurements are ready in the measuring instrument and guide you efficiently.

Ready to use right away

No more waiting time. In standby mode, the testo 300 is immediately ready for measurement at the touch of a button.

Så här underlättar testo Smart-appen för dig:

• Enkel inställning av mätinstrumentet
• Effektiv kund- och mätplatshantering
• Pålitlig lagring av alla mätdata
• Förvandlar mobilen till en andra skärm
• Visning av grafiska mätvärdeskurvor
• Enkel dokumentering av allt arbete
• Skicka rapporter direkt från mätplatsen via e-post

testo Smart-appen finns på Google Play och App Store. Den är gratis att både ladda ned och använda.

Included in delivery

Flue gas meter testo 300 Pro II with_O2 and_{H2 compensated} CO measuring cell up to 30 000 ppm, USB power supply.

Inlägget testo 300 Pro II – O2 and CO up to 30,000 ppm dök först upp på Nordtec.

1 O2 measuring cell + 3 optional measuring cell locations – choose between 7 gas measuring cells

testo 340 is a powerful instrument for spot checks of emission values in industrial applications. The system emphasizes high flexibility and functionality when measuring various emission parameters in industrial applications. The instrument has 4 measurement cell locations where only O2 is fixed. In addition, it is possible to choose freely between CO, COlow, NO, NOlow, NO2, SO2 (at least one measuring cell must be selected). Apart from the gases listed above, the instrument measures and calculates all the usual parameters such as temperature, pressure, excess air and others. but also mass and volume flows.

The memory management in testo 340 allows for shorter logging of measured values (max. 2 hours). The memory also allows for site management with 100 folders (customers/system) and 10 sites under them. Up to 200 measurement blocks per site can be logged/saved (limited by the number of folders and sites). To analyze measurement data, the software (easyEmission) efficiently presents measurement data, manages the customer database and creates reports. The measurement data can also be saved to a PDA via the IRDA interface.

The testo 340 has an advanced self-diagnostic feature that provides the user with information about the performance of the instrument. The instrument warns before a measuring cell runs out so that there is time to order home before they are used up. This avoids unpleasant surprises during their work. The instrument has been fitted with a new gas pump that automatically regulates the flow and keeps it constant, helping to improve measurement accuracy. The new pump also offers the possibility to extend the hose between the flue gas sensor by up to 7.8 meters.

• TÜV approved / EN standard 50379 Part 2
• Powerful instrument diagnosis
• PC analysis with “easyEmission” (download evaluation version from the Download tab)
• Logging function up to two hours
• Optional measuring cells in addition to O2: CO, COlow, NO, NOlow, NO2, SO2
• Dilution: 5 times on one cell site, 2 times on all cell sites.

Contact us for more information on the instrument and its accessories.

[show_related_featured_videos]

Included in delivery

Flue gas instrument testo 340, factory protocol, carrying strap,_{O2 measuring cell} and integrated flow and differential pressure measurement.

Fabriksprotokoll: utfärdas på fabriken efter en kontroll av att produkten fungerar och uppfyller angiven mätnoggrannhet. Läs om skillnaden mellan fabriksprotokoll och ackrediterad kalibrering.

ATTENTION! Your testo 340 must be equipped with at least one additional gas measuring cell to work. Up to three additional measuring cells can be mounted.

Inlägget testo 340 – professional flue gas instrument for industry dök först upp på Nordtec.

Versatile portable analysis system for stationary engines, industrial burners, gas turbines and boilers. The analysis system can measure O2, CO, CO2 (NDIR), NO, NO2, SO2, HC, H2S, °C, differential pressure and a number of calculated parameters. The system consists of three main parts: handheld terminal, analysis box and flue gas sensor.

• Logger function
• Printers
• Heating of measuring cells
• Dilution for high CO concentrations (optional)
• Gas preparation
• Up to 6 measuring cells
• Flexible flue gas sensor program
• Data management
• TÜV approved / EN 50379-2

THE HANDHELD TERMINAL

Used as a control and display unit, it has a large display that shows up to 6 parameters simultaneously and has a built-in printer. The handheld terminal is purchased separately.

THE ANALYSIS BOX

Is the heart of the system where all measurements are made and where the measurement cells are located. The box is equipped with O2 measuring cell as standard, at least one more cell must be selected. The analysis box can be equipped with up to 6 measuring cells. In addition, it can also be equipped with a gas preparation and dilution function for high CO concentrations, which is important for long-term measurements. The analysis box can log up to 500,000 measurements. All data can then be analyzed in the easyEmission PC software.

THE FLUE GAS GENERATOR

Is an important detail that largely determines whether a measurement is good or not. Length, temperature, moisture content, dust load, etc. are parameters that must be considered when selecting a sensor. A very wide range of sensors is available to meet the requirements of these parameters.

SOFTWARE

The software of the system is also an important part, as the data will be analyzed and presented in reports. The easyEmission PC software only works with the testo 350 and testo 340 but provides the essential functions such as graphs, report printouts etc. Download the program from the Download tab.

Contact us for more information on the system.

[show_related_featured_videos]

Included in delivery

The analysis box testo 350, equipped with_{O2 measuring cell}, differential pressure sensor, input for temperature sensor type K NiCr-Ni and type S, Pt10Rh-Pt, connection for Testo data bus, rechargeable battery, integrated combustion air sensor (NTC), trigger input, memory for measurement data, USB interface, carrying strap and factory protocol.

Fabriksprotokoll: utfärdas på fabriken efter en kontroll av att produkten fungerar och uppfyller angiven mätnoggrannhet. Läs om skillnaden mellan fabriksprotokoll och ackrediterad kalibrering.

Inlägget testo 350 – system for industrial flue gas analysis dök först upp på Nordtec.