Celsicom V600 is a special development of the Celsicom monitoring system. The measuring instrument is designed with a focus on fast and efficient adjustment of ventilation. The meter is connected, wireless and powered by two standard, replaceable AA batteries. The operating time is around 150 hours (depending on ambient temperature, signal strength and battery quality). You have the option to add sensors to the V600 to monitor additional quantities such as temperature, humidity, radon and CO2. Note! If a measuring hose or measuring hook is connected to the instrument, the hose/hook may be a maximum of 1.0 m long and must have an internal diameter of at least 3.0 mm.

Simplified tuning using your mobile phone

The V600 reference sensor meter allows you to make a ventilation adjustment completely on your own. Just connect the meter to the reference device and you are ready to start measuring.

No gateway or base station needed

All of the new generation of Celsicom measurement products have a direct, secure transfer of data to the cloud without the need for a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero. On your mobile phone, you then monitor the pressure and flow of the reference device.

Clear interface

On the Celsiview mobile website, enter the K-factor and the projected flow of the reference device. The adjustment is made according to the proportionality principle. That is, the mobile shows the reference device’s flow as a percentage of the projected flow and what flow the other devices should be adjusted to. If there is a change in pressure, the values are recalculated within seconds, so you always have up-to-date measurement data from the reference air outlet meter. The interface can be set to display the flow in l/s or m³/h and the pressure in Pa on the sensors.

Easy to get started

To start using the Celsicom V600, simply scan the QR code inside the meter and log in (or create an account) to the Celsiview cloud service where you also register the hardware. Shortly afterwards, you can easily make the settings and start the adjustment work via your mobile.

Molntjänsten Celsiview

Webbaserade tjänsten Celsiview är en förutsättning för att kunna utföra ventilationsinjusteringar med Celsicom V600. Priset för Celsiview är 154 kr i månaden per referensdonsmätare. Då ingår också kostnaden för all datatrafik.

Till Celsiview

Included in delivery

Celsicom V600 reference anemometer, holder with magnetic attachment, measuring hook and hose

Inlägget Celsicom V600 – reference meter for ventilation tuning dök först upp på Nordtec.

The Celsicom TH601B data logger has a compact, moisture-resistant housing and a fixed external cable sensor for temperature and humidity measurement (2 meter cable length). Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature, %RH, vapor content and dew point during moisture remediation, building moisture and more. Suitable for applications above 80 %RH, e.g. when dehumidifying concrete slabs.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature and humidity curve
The curves below are an example of what it can look like in the mobile phone, tablet or computer when monitoring temperature and humidity in the same measuring point.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect TH601B, temp/humidity sensor 2 m cable

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom TH601B – 2 m cable temperature/humidity sensor dök först upp på Nordtec.

The Celsicom TH601A data logger has a compact, moisture-resistant housing and a fixed, external cable sensor for temperature and humidity measurement (0.4 meter cable length). Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature, %RH, vapor content and dew point for e.g. moisture remediation, building moisture, etc. You can also set a limit value and receive alerts via email (included) or SMS (optional) when dehumidification is complete.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature and humidity curve
The curves below are an example of what it can look like in the mobile phone, tablet or computer when monitoring temperature and humidity in the same measuring point.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect TH601A, temp/humidity sensor 0.4 m cable

Purchase with adjustment for building moisture

Tips! When used in applications above 80%RH, such as dehumidifying concrete slabs, we recommend that you choose to have the logger pre-calibrated for building moisture applications. See calibration option above.

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the tab Accessories).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the tab Accessories).

Inlägget Celsicom TH601A – 0.4 m cable temperature/humidity sensor dök först upp på Nordtec.

The Celsicom DP600 data logger measures the difference between two pressures, e.g. be pressure differences in homes or production facilities. Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, get alerts if something deviates and create reports – no matter where you are.

The DP600 can also be used to monitor a filter, in order to receive an alarm when the filter becomes clogged. Alarms are sent via email (included) or SMS (optional). Note! If a measuring hose or measuring hook is connected to the instrument, the hose/hook may be a maximum of 1.0 m long and must have an internal diameter of at least 3.0 mm.

Find out more about the different parts of the Celsicom system.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Included in delivery

Celsicom Easy Connect DP600, Differential pressure ±125 Pa

Inlägget Celsicom DP600 – differential pressure dök först upp på Nordtec.

The Celsicom TH600 data logger is part of the Celsicom measurement system. It has a compact, moisture-resistant housing and internal sensors for both humidity and temperature. The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. A typical application could be remote monitoring of building climate or sensitive indoor environments such as production facilities, warehouses, offices, churches, museums and more.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve
The curve below is an example of what it might look like on a mobile phone, tablet or computer when monitoring temperature and humidity.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect TH600, internal temp/humidity sensor

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the tab Accessories).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the tab Accessories).

Inlägget Celsicom TH600 – internal temperature and humidity sensor dök först upp på Nordtec.

The TC603 concrete computer has a robust and durable enclosure and is intended for use with 2 external thermocouple sensors. Several types can be used and the default setting is type T (ordered separately), which is easily mounted with pole screws. It also has 1 built-in internal ambient temperature sensor. A typical application is concrete temperature measurement and strength calculations. Learn more about the different parts of the Celsicom system.

• For concrete temperature and concrete strength
• Mobile-connected temperature monitoring in concrete
• Inputs for 2 external wire sensors (ordered separately)
• Internal ambient temperature sensor
• Measurement range: depending on thermocouple type (external sensors), -30 °C to +70 °C (internal sensor)
• Low price on unlimited cloud storage

The main advantages of TC603

No gateway or base station needed

All loggers in the new Celsicom generation have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started

After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly see the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

If you want to use a concrete recipe (either your own or existing in Celsiview) and follow the strength, there is a monthly fee per logger.

Backup memory

In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Concrete strength

The graph below is an example of what the graph on your phone, tablet or computer might look like during a concrete pour. By selecting concrete recipes in the cloud service, you get a strength calculation and can plan when to demolish the forms more efficiently. You can even add your own concrete recipes if none of the standard recipes already entered can be used for your application.

Celsiview – the cloud service packed with smart features

Celsiview offers a variety of ready-made concrete recipes to choose from. If your recipe is not included in the standard recipes, you can easily add your own recipe based on pressure-tested concrete cubes.

In the detailed report view, you can easily retrieve current measurement values that can be downloaded and sent as PDF or Excel to any recipient.

After logging in to the home page, you will immediately see a summary of important parameters for your active castings.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect TC603, 2 x TE type T + 1 x int.temp, 2 x AA/LR6 1.5V batteries

Inlägget Celsicom TC603 – concrete computer dök först upp på Nordtec.

The Celsicom T600 data logger has a compact, moisture-resistant housing and a built-in sensor for ambient temperature monitoring. The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be heat adjustment, remote monitoring of climate rooms and indoor climate, etc.

The main benefits

No gateway or base station needed

All loggers in the new Celsicom generation have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started

After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly see the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory

In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve

The graph below is an example of how the graph on your phone, tablet or computer might look when monitoring temperature.

ATTENTION!

• Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
• If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom T600 – internal temperature sensor dök först upp på Nordtec.

The Celsicom T601B data logger has a compact, moisture-resistant housing with a fixed external cable sensor for temperature measurement (2 meter cable length). The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature in, for example, refrigerators, freezers, cold stores, cold rooms, freezer rooms, etc. When your set limits are exceeded, you will be alerted by email (included) or SMS (optional).

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve
The curve below is an example of what it might look like on a mobile phone, tablet or computer when monitoring temperature.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect T601B, temperature sensor with 2 m cable

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom T601B – temperature sensor with 2 m cable dök först upp på Nordtec.

The Celsicom T601C data logger has a compact, moisture-resistant housing with a fixed external cable sensor for temperature measurement (5 meters cable length). The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature in, for example, refrigerators, freezers, cold stores, cold rooms, freezer rooms, etc. When your set limits are exceeded, you will be alerted by email or SMS (optional).

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve
The curve below is an example of what it might look like on a mobile phone, tablet or computer when monitoring temperature remotely.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect T601C, temperature sensor with 5 m cable

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom T601C – temperature sensor with 5 m cable dök först upp på Nordtec.

The Celsicom TC602 data logger has a compact and durable housing with 2 inputs for external thermocouple sensors of type T or K. The measured values are automatically transferred via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. Examples of applications include remote monitoring of differential temperatures between inlet and outlet in heating systems, monitoring of cooling processes and more. For remote monitoring of concrete temperature and strength, we recommend model TC603, which has a waterproof enclosure and an internal temperature sensor. Read more about the different parts of the Celsicom system.

The main benefits

No gateway or base station needed

All loggers in the new Celsicom generation have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started

After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly see the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory

In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curves

The graphs below are an example of what it might look like on a mobile phone, tablet or computer when monitoring the temperature of two measuring points.

Included in delivery

Celsicom Easy Connect TC602T, 2 x thermocouple type T/K

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the tab Accessories).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the tab Accessories).

Inlägget Celsicom TC602 – two inputs for thermocouple sensors dök först upp på Nordtec.