The Celsicom T600 data logger has a compact, moisture-resistant housing and a built-in sensor for ambient temperature monitoring. The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be heat adjustment, remote monitoring of climate rooms and indoor climate, etc.

The main benefits

No gateway or base station needed

All loggers in the new Celsicom generation have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started

After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly see the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory

In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve

The graph below is an example of how the graph on your phone, tablet or computer might look when monitoring temperature.

ATTENTION!

• Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
• If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom T600 – internal temperature sensor dök först upp på Nordtec.

The Celsicom TH600 data logger is part of the Celsicom measurement system. It has a compact, moisture-resistant housing and internal sensors for both humidity and temperature. The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. A typical application could be remote monitoring of building climate or sensitive indoor environments such as production facilities, warehouses, offices, churches, museums and more.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve
The curve below is an example of what it might look like on a mobile phone, tablet or computer when monitoring temperature and humidity.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect TH600, internal temp/humidity sensor

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the tab Accessories).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the tab Accessories).

Inlägget Celsicom TH600 – internal temperature and humidity sensor dök först upp på Nordtec.

The Celsicom TC602 data logger has a compact and durable housing with 2 inputs for external thermocouple sensors of type T or K. The measured values are automatically transferred via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. Examples of applications include remote monitoring of differential temperatures between inlet and outlet in heating systems, monitoring of cooling processes and more. For remote monitoring of concrete temperature and strength, we recommend model TC603, which has a waterproof enclosure and an internal temperature sensor. Read more about the different parts of the Celsicom system.

The main benefits

No gateway or base station needed

All loggers in the new Celsicom generation have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started

After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly see the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory

In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curves

The graphs below are an example of what it might look like on a mobile phone, tablet or computer when monitoring the temperature of two measuring points.

Included in delivery

Celsicom Easy Connect TC602T, 2 x thermocouple type T/K

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the tab Accessories).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the tab Accessories).

Inlägget Celsicom TC602 – two inputs for thermocouple sensors dök först upp på Nordtec.

The THC600B is ideal for measuring air quality in a variety of environments, such as classrooms, training rooms, conference rooms and similar spaces. The sensor measures carbon dioxide, air pressure, temperature and humidity.

The main benefits

No gateway or base station needed
All boxes in the new Celsicom generation have a direct, secure transfer of data to the cloud without the need for a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
Once you have scanned the QR code on your first box, a window opens on your mobile phone where you can create a new cloud service account. After filling in your data and naming the box, you can quickly get started and instantly see the values from the box on your phone, tablet or computer. If you already have an account, log in and name the new box.

Celsiview cloud service
All measured values ​​are automatically stored in the Celsiview cloud service. The price for cloud storage is 25 SEK per month per logger. This also includes the cost of all data traffic. An unlimited amount of data is stored in the cloud as long as the subscription continues.

To Celsiview

Backup memory
In addition to sending all measurement values to the cloud service, they are also saved in a backup memory in each box. However, if there is a disruption, all measurement data is sent at the next transmission time.

See the readings at any time
The graph below is an example of what it might look like on your phone, tablet or computer.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect THC600B, internal sensor for temperature, air pressure, humidity and CO2

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the tab Accessories).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the tab Accessories).

Inlägget Celsicom THC600B – internal sensor for temperature, humidity, air pressure and CO2 dök först upp på Nordtec.

The Celsicom T601B data logger has a compact, moisture-resistant housing with a fixed external cable sensor for temperature measurement (2 meter cable length). The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature in, for example, refrigerators, freezers, cold stores, cold rooms, freezer rooms, etc. When your set limits are exceeded, you will be alerted by email (included) or SMS (optional).

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve
The curve below is an example of what it might look like on a mobile phone, tablet or computer when monitoring temperature.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect T601B, temperature sensor with 2 m cable

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom T601B – temperature sensor with 2 m cable dök först upp på Nordtec.

The Celsicom T601C data logger has a compact, moisture-resistant housing with a fixed external cable sensor for temperature measurement (5 meters cable length). The measured values are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature in, for example, refrigerators, freezers, cold stores, cold rooms, freezer rooms, etc. When your set limits are exceeded, you will be alerted by email or SMS (optional).

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature curve
The curve below is an example of what it might look like on a mobile phone, tablet or computer when monitoring temperature remotely.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect T601C, temperature sensor with 5 m cable

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom T601C – temperature sensor with 5 m cable dök först upp på Nordtec.

The Celsicom TH601A data logger has a compact, moisture-resistant housing and a fixed, external cable sensor for temperature and humidity measurement (0.4 meter cable length). Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature, %RH, vapor content and dew point for e.g. moisture remediation, building moisture, etc. You can also set a limit value and receive alerts via email (included) or SMS (optional) when dehumidification is complete.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature and humidity curve
The curves below are an example of what it can look like in the mobile phone, tablet or computer when monitoring temperature and humidity in the same measuring point.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect TH601A, temp/humidity sensor 0.4 m cable

Purchase with adjustment for building moisture

Tips! When used in applications above 80%RH, such as dehumidifying concrete slabs, we recommend that you choose to have the logger pre-calibrated for building moisture applications. See calibration option above.

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the tab Accessories).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the tab Accessories).

Inlägget Celsicom TH601A – 0.4 m cable temperature/humidity sensor dök först upp på Nordtec.

The Celsicom TH601B data logger has a compact, moisture-resistant housing and a fixed external cable sensor for temperature and humidity measurement (2 meter cable length). Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, receive alarms if something deviates and create reports – no matter where you are. Typical applications for this logger in the Celsicom system can be remote monitoring of temperature, %RH, vapor content and dew point during moisture remediation, building moisture and more. Suitable for applications above 80 %RH, e.g. when dehumidifying concrete slabs.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Temperature and humidity curve
The curves below are an example of what it can look like in the mobile phone, tablet or computer when monitoring temperature and humidity in the same measuring point.

[show_related_featured_videos]

Included in delivery

Celsicom Easy Connect TH601B, temp/humidity sensor 2 m cable

ATTENTION!
– Don’t forget to buy batteries. Two pieces are needed for each logger (see under the Accessories tab).
– If the box is to be mounted on metal, use bracket 7040 0060 (see under the Accessories tab).

Inlägget Celsicom TH601B – 2 m cable temperature/humidity sensor dök först upp på Nordtec.

The Celsicom DP600 data logger measures the difference between two pressures, e.g. be pressure differences in homes or production facilities. Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, get alerts if something deviates and create reports – no matter where you are.

The DP600 can also be used to monitor a filter, in order to receive an alarm when the filter becomes clogged. Alarms are sent via email (included) or SMS (optional). Note! If a measuring hose or measuring hook is connected to the instrument, the hose/hook may be a maximum of 1.0 m long and must have an internal diameter of at least 3.0 mm.

Find out more about the different parts of the Celsicom system.

The main benefits

No gateway or base station needed
All new generation Celsicom loggers have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started
After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly view the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory
In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Included in delivery

Celsicom Easy Connect DP600, Differential pressure ±125 Pa

Inlägget Celsicom DP600 – differential pressure dök först upp på Nordtec.

The Celsicom MM611B data logger is used to measure moisture in structures via nails/screws installed in the material. Measurements are automatically transmitted via the mobile network to the Celsiview cloud service, where you can follow the measurements in real time, get alerts if something deviates and create reports – no matter where you are. In the cloud service, you can also set the desired measurement curve, such as for pine, spruce or WME.

Find out more about the different parts of the Celsicom system.

No gateway or base station needed

All loggers in the new Celsicom generation have a direct, secure transfer of data to the cloud without detouring around a base station or gateway. The data traffic is sent on a licensed frequency exclusively for NB-IoT on Telia’s existing mobile network. Coverage is excellent and the risk of interference is virtually zero.

Easy to get started

After scanning the QR code on your first logger, a window will open on your phone where you can create a new cloud service account. After filling in your details and naming the logger, you’ll be up and running in no time and can instantly see the logger readings on your phone, tablet or computer. If you already have an account, log in and name the new logger.

Molntjänsten Celsiview
Alla mätvärden lagras automatiskt i molntjänsten Celsiview som nås via webbläsaren på en mobil, surfplatta eller dator. Priset för molnlagringen är 25 kr i månaden per logger. Då ingår också kostnaden för all datatrafik. En obegränsad mängd data lagras i molnet så länge abonnemanget fortlöper.

Till Celsiview

Backup memory

In addition to sending all measurements to the cloud service, they are also stored in a backup memory in each logger. However, if there is a disruption, all measurement data is sent at the next transmission time.

Included in the delivery

A Celsicom MM611B moisture meter

Inlägget Celsicom MM611B – moisture sensor with 1.2 m cable dök först upp på Nordtec.